Velour Needle Loom for Nonwoven Production
The ZHOU JI Velour Needle Loom processes reinforced nonwoven material to create a velour-like surface. Multiple needle-beam, transmission and brush-loop configurations allow the machine to be adapted to different surface styles and production requirements, with specified needle frequency up to 2000 r/min.
Velour Needle Loom Overview
Velour Surface Formation
Creates a soft, velour-like surface on reinforced nonwoven material.
Multiple Mechanical Configurations
Needle-beam, transmission and brush-loop arrangements can be selected.
In-Line Operation
The machine can be linked with the complete production line to reduce manual handling.
Key Features
Needle-Beam Options
Available with double-needle-beam or four-needle-beam configurations.
Transmission Options
Through-shaft and crankshaft structures are available.
Brush Loop Options
Large-loop and small-loop brush conveyor configurations can be selected.
Production Line Linkage
The machine can operate together with the complete line to reduce manual handling.
Needle Layout Flexibility
Different needle layouts can be used to adjust production efficiency and surface style.
Automatic Brush Cleaning
Automatic brush cleaning is designed to extend continuous operating time.
Suitable Fibers & Applications
The Velour Needle Loom processes reinforced nonwoven material.
Suitable Fibers
- Final suitability depends on the required velour surface, needle layout and brush configuration.
Typical Applications
- Automotive flooring systems
- Velour-like needle punched surfaces
- Selected geotechnical applications listed in the source document
Velour Needle Loom Production Process
The highlighted stage shows where the Velour Needle Loom is used within the nonwoven production process. The exact upstream and downstream equipment depends on the finished product and line configuration.
Reinforced nonwoven material passes through the velour needling section, where the selected needle and brush arrangement develops the required surface texture. Different needle layouts can be used to influence surface style and production efficiency.
Technical Specifications
Specifications are based on the supplied product document. Final machine configuration should be confirmed according to the production process and product requirements.
Velour Needle Loom vs. Pattern & Jacquard Machine
The two machines perform different functions within nonwoven production. The comparison below shows their main process differences.
Used in Complete Nonwoven Production Lines
Why Choose ZHOU JI Velour Needle Loom?
Surface-Texture Processing
Designed specifically to create a velour-like nonwoven surface.
Multiple Configuration Options
Needle-beam, transmission and brush-loop arrangements can be selected.
High Specified Needle Frequency
The supplied document specifies up to 2000 r/min.
Automatic Brush Cleaning
Designed to extend machine operating time between manual cleaning.
Velour Needle Loom FAQs
It is a surface-processing needle loom used to create a velour-like finish on reinforced nonwoven material.
2500 mm, 3600 mm, 4000 mm and 4500 mm.
Up to 2000 r/min.
Double-needle-beam and four-needle-beam configurations are listed.
The supplied source document states '30m'. This value should be verified before publication rather than silently corrected.
Send your production requirements and receive a practical machine proposal.
Share your working width, required surface style and project details. ZHOU JI will review the process route and equipment configuration with you.